Picture Adjustment - Sanyo CP14SA1G Instruction Manual

Picture Adjustment

Picture Adjustment Menu
COLOUR
BRIGHT
CONTRAST
TINT
SHARPNESS
FINE TUNING
IIIIIIIIIIIIII-----------
SELECT ADJUST
Picture Adjustment Item
COLOUR : Adjusts colour intensity.
BRIGHT : Adjusts picture brightness.
CONTRAST : Adjusts picture contrast.
TINT : Adjust colour tints. (Displayed only on
NTSC or NTSC4.43 system signal
reception.)
SHARPNESS : Adjusts picture detail.
FINE TUNING :
Fine tuning in case of week broadcast
signal or poor reception. Only displayed in
TV mode. Will not be displayed in AV
mode.
Note:
The picture adjustment data (Colour, Brightness,
Contrast, Tint and Sharpness) is automatically
stored in PERSONAL mode of the Quick Picture
Controls (See page 8). These settings will be
used when PERSONAL mode is selected.
PERSONAL
Basic picture adjustment operation
1 Press the MENU button for MAIN
menu display.
PICTURE PICTURE
PRESET
SELECT ENTER
(MAIN MENU)
BACK
P P
EXIT
M
EXIT
M
2 When "PICTURE" is not selected, select
"PICTURE" with the Programme UP or
DOWN button.
PICTURE PICTURE
PRESET
3 Press the VOLUME + or - button to
display Picture Adjustment menu.
COLOUR
BRIGHT
CONTRAST
TINT
SHARPNESS
FINE TUNING
IIIIIIIIIIIIII-----------
SELECT ADJUST
To return to Main menu, press the
ALTERNATE button.
To return to the normal TV mode, press the
MENU button. ( Or will automatically return to
the normal TV mode after 20 seconds.)
4 Select desired control by pressing the
Programme UP or DOWN button.
COLOUR
BRIGHT
CONTRAST
TINT
SHARPNESS
FINE TUNING
IIIIIIIIIIIIIIIII-------
SELECT ADJUST
5 Press the VOLUME + or - button to
alter settings.
BRIGHT
IIIIIIIIIIIIII-----------
ADJUST P P BACK
Approximately five seconds after you
release the VOLUME (+ / - ) button, the
screen display switches from the adjustment
screen to the normal TV screen.To return to
the Picture adjustment menu, press the
ALTERNATE button within five seconds of
releasing the VOLUME (+ / - ) button.
P P BACK
EXIT
M
BACK
P P
EXIT
M
EXIT
M
11