Precautions and limitations for game mode
– To disconnect the game console and connect
another external device, set Game Mode to Off in
the setup menu.
– If you display the TV menu in Game Mode, the
screen shakes slightly.
Game Mode is not available when the input source
is set to TV or PC.
After connecting the game console, set Game Mode
to On to prevent poor picture quality.
If Game Mode is On: Picture mode is set to
Standard and Sound mode is set to Movie.
Selecting Reset after adjusting the equalizer returns
the equalizer to its default settings.
■ Menu Transparency (Bright / Dark): Set the
Transparency of the menu.
■ Melody (Off / Low / Medium / High): Set so that a
melody plays when the TV is turned on or off.
Picture In Picture (PIP)
You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in
the same mode.
For PIP sound, refer to the Sound Select
If you turn the TV off while watching in PIP mode, the
PIP window will disappear.
You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
HDMI2, HDMI3, PC
■ PIP (Off / On): Activate or deactivate the PIP function.
■ Channel: Select the channel for the sub-screen.
■ Size (Õ / Ã): Select a size for the sub-picture.
■ Position (Ã / – / — / œ): Select a position for the
■ Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.
■ CI Menu: This enables the user to select from the CAM-
provided menu. Select the CI Menu based on the menu
■ Application Info: View information on the CAM inserted
into the CI slot and on the "CI (CI+) CARD" which is
inserted into the CAM. You can install the CAM anytime
whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by
2. Firmly insert the "CI (CI+) CARD" into the CAM in the
direction of the arrow.
3. Insert the CAM with the "CI (CI+) CARD" into the
common interface slot, in the direction of the arrow so
that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal
■ Picture Test (Yes / No): Use to check for picture
■ Sound Test (Yes / No): Use the built-in melody sound to
check for sound problems.
If you hear no sound from the TV's speakers,
before performing the sound test, make sure
Speaker Select is set to TV Speaker in the
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the
■ Signal Information: (digital channels only) HDTV
channel's reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
■ Troubleshooting: If the TV seems to have a problem,
refer to this description.
If none of these troubleshooting tips apply, contact
the Samsung customer service centre.