Table of Contents
Advertisement
Remove the empty batteries.
2.
11 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
11.1 Malfunctions
Fault
The appliance is not working.
The lighting does not work.
Remote control not working.
In the LED display, the LEDs
flash one to five times after the
appliance is switched off.
The lighting automatically
switches on as soon as the appli-
ance is connected to the power
supply.
LED 1 flashes in the LED display. The grease filters are saturated.
LED 2 flashes in the LED display. The odour filters are saturated.
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other appliances are working.
▶
Different causes are possible.
Call the after-sales service.
▶
→ "Customer Service", Page 14
Defective LED lights may be replaced by the manufacturer, their customer
▶
service or a qualified technician (electrician) only.
The batteries are flat.
→ "Replacing the batteries in the remote control", Page 12
▶
The batteries are almost empty.
→ "Replacing the batteries in the remote control", Page 12
▶
Demo mode is switched on.
Press and hold
and
▶
→ "Cleaning grease filters in the dishwasher", Page 12
▶
→ "Cleaning grease filters manually", Page 12
▶
Change the odour filter.
▶
Insert the new batteries (3 V CR 2032).
3.
Close the cover.
4.
Dispose of the empty batteries in an environmentally
5.
friendly manner.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by trained specialist staff.
for approx. three seconds.
Troubleshooting en
13
Advertisement
Table of Contents
