Table of Contents
Advertisement
Note: To ensure that the appliance is not damaged,
3.
do not overtighten the screws.
Carefully tighten screws in succession until the ap-
pliance is flush-mounted on the ceiling.
Connecting the appliance
Press together the cable duct at the sides and re-
1.
move it.
Disconnect the cable at the appropriate point.
2.
Undo the opposite screws to loosen the fan box.
3.
T 20
Turn the fan box into the correct position according
4.
to the installation situation.
Push the fan box to the side and connect the appli-
5.
ance to the power supply.
Push the fan box to the other side and connect the
6.
pipework.
Position the fan box in the centre and screw it firmly
7.
in place.
Connect the cable.
8.
Press together the cable duct at the sides and at-
9.
tach.
Installation instructions en
19
Advertisement
Table of Contents
