You will then be asked to enter the "User Name"
●
and "Organization".
Review your information and click the "Install"
●
button to begin the installation.
Once the necessary files have all been successfully
●
installed, click "Finish".
The first time you installed the CODECS, a window
●
will automatically pop up asking whether you would
like to the NETCAM IP address. Click "Yes", and
you will be prompted to enter the IP address that
is assigned to your AV400HD in the System Status
menu.
Enter the IP address into the box and you are all set
●
to go!
A NETCAM desktop icon will be set after the
●
installation, should you need to reset the IP address,
just simply click on the desktop icon and repeat the
last step again.
61
AV400HD
English