Table of Contents
Advertisement
Firmware Upgrade
Asystems works diligently to keep improving our products and will release firmware updates periodically. This section
describes the steps to perform the system updates.
FW Upgrade Menu
Select FW
Confirm FW Upgrade
FW upgrading in progress
Restart System
Keep user data:
Use SEL knob to place cursor to Keep User Data.
Press ENTER to select or deselect the option.
ON (Default): All user data will be saved while
●
performing FW upgrade.
OFF: All data will be erased while performing FW
●
upgrade.
Firmware Upgrade:
Place FW data in the SD card. If FW data exists in the
SD card, it will be displayed. Use SEL knob to select
the FW from the list.
Press ENTER to confirm selected FW data. Continue
prompt screen will pop up. Use ← → to select between
Yes and No. Press ENTER again to proceed.
When upgrade completes, it will automatic restart the
system.
59
AV400HD
English
Advertisement
Table of Contents
