Table of Contents
Advertisement
True Food Service Equipment, Inc.
MAINTENANCE, CARE & CLEANING
MAINTENANCE, CARE & CLEANING
CLEANING THE CONDENSER COIL
When using electrical appliances, basic safety precautions should be followed, including the following:
REQUIRED TOOLS:
• Phillips Screwdriver
• Stiff Bristle Brush
• Adjustable Wrench
• Vacuum Cleaner
Step 1
Disconnect power to unit.
Step 2
Image 3.
Take off rear lower grill assembly by removing (2) side
screws.
Step 3
Remove bolts connecting frame rail cross bar to allow
access to compressor.
Step 4
Remove bolts anchoring compressor assembly to frame
rails and carefully slide out. (tube connections are
flexible)
Step 5
Clean off accumulated dirt from condensing coil with a
Image 4.
stiff bristle brush.
Step 6
Lift W.R. Board cover above fan at plastic plugs and
carefully clean condenser coil and fan blades.
Step 7
After brushing condenser coil vacuum dirt from coil, and
interior floor.
Step 8
Replace cardboard cover. Carefully slide compressor
assembly back into position and replace bolts.
Step 9
Reinstall rear grill assembly onto unit with appropriate
screws. Tighten all screws.
Step 10
Connect unit to power and check to see if compressor is
running.
............ www.truemfg.com ............
10
10
Advertisement
Table of Contents
