Related Manuals for UTC Fire and Security Interlogix VT72830-R3
Summary of Contents for UTC Fire and Security Interlogix VT72830-R3
- Page 1 VT72830-R3 VR72830-R3 IFS Fiber Module Installation & Operation Instructions P/N 1062786 • REV B • ISS 25APR12...
- Page 2 VT7800A VT7800B VT7800C VT7800DX 8 CHANNEL 4 CHANNEL DIGITAL PS-R3 8 CHANNEL 8 CHANNEL POWER SUPPLY DIGITAL VIDEO TRANSMITTER DIGITAL VIDEO TRANSMITTER DIGITAL VIDEO TRANSMITTER VIDEO TRANSMITTER 115VAC - 1A 50/60HZ VIDEO STATUS 220VAC - 1/2A 50/60HZ VIDEO STATUS VIDEO STATUS CHAN 1 CHAN 5 CHAN 9...
- Page 3 Video detected from a camera (Channels 1 - 24) LED changes from RED to GREEN Power LED illuminates GREEN Video input from a camera (Channels 25 - 28) LED illuminates GREEN Video detected from a camera (Channels 25 - 28) LED illuminates GREEN Video detected from the transmitter (Channels 1 - 24) LED changes from RED to GREEN...
- Page 4 PCB's VT72830-R3 REAR VIEW Chan 21 Chan 17 Chan 13 Chan 9 Chan 5 Chan 1 Chan 25 Chan 22 Chan 18 Chan 14 Chan 10 Chan 6 Chan 2 Chan 26 Chan 23 Chan 19 Chan 15 Chan 11 Chan 7 Chan 3 Chan 27...
- Page 5 PCB's VT72830-R3 REAR VIEW Chan 21 Chan 17 Chan 13 Chan 9 Chan 5 Chan 1 Chan 25 Chan 22 Chan 18 Chan 14 Chan 10 Chan 6 Chan 2 Chan 26 Chan 23 Chan 19 Chan 15 Chan 11 Chan 7 Chan 3 Chan 27...
-
Page 6: Fcc Compliance
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Changes or modifications not expressly approved by International Fiber Systems, Inc. -
Page 7: Technical Support
Contacting us For help installing, operating, maintaining, and troubleshooting this product, refer to this document and any other documentation provided. If you still have questions, contact us during business hours (Monday through Friday, excluding holidays, between 5 a.m. and 5 p.m. Pacific Time). Table 3. - Page 8 Product Disassembly Instructions for WEEE Per European Directive 2002/95/EC Waste Electrical and Electronic Equipment Required Tools: One number 2 Phillips (crosstip) screwdriver. One number 2 flat screwdriver. For the enclosed box version: 1. Locate and remove box cover securement screws. Usually, but not limited to, at least 4 screws.
- Page 9 Copyright © 2011 UTC Fire & Security. All rights reserved. Trademarks and Interlogix and IFS names and logos are trademarks of patents UTC Fire & Security. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products.
Need help?
Do you have a question about the Interlogix VT72830-R3 and is the answer not in the manual?
Questions and answers