16
JP44 – Wake-On-LAN (WOL) Header
Attach a 3-pin connector from the LAN card which supports the Wake-
On-LAN (WOL) function.
connected computer through the LAN card. (The cable should be
included with the LAN card.)
PS1 – PS/2 Mouse Connector
Attach 6-pin male PS/2 mouse cable to this connector to enable PS/2
mouse function.
USB1 – USB Ports Connectors
Attach 9-pin USB cable to this connector for normal USB devices.
This function lets users wake up the
JP44 Pin Assignment
1
5V
2
GND
3
SENSOR
PS/2 Mouse Connector
Pin Assignment
GND DATA
Clcok
Hardware Setup
N/A
Vcc
N/A