Dell S2718H User Manual page 15

Environmental characteristics
Model
Temperature
Operating
Non-operating
Humidity
Operating
Non-operating
Altitude
Operating (maximum)
Non-operating (maximum)
Thermal dissipation
Power management modes
If you have VESA's DPM compliance display card or software installed in your PC, the
monitor can automatically reduce its power consumption when not in use. This is
referred to as Power Save Mode*. If the computer detects input from the keyboard,
mouse or other input devices, the monitor automatically resumes functioning. The
following table shows the power consumption and signaling of this automatic power
saving feature.
* Zero power consumption in off mode can only be achieved by disconnecting the
power cable from the monitor.
VESA Horizontal
Modes Sync
Normal Active
operation
Active-off Inactive
mode
Switch off -
Energy Star
P
ON
E
TEC
S2718H/S2718HX
0°C to 40°C (32°F to 104°F)
∞ Storage: -20°C to 60°C (-4°F to 140°F)
∞ Shipping: -20°C to 60°C (-4°F to 140°F)
10% to 80% (non-condensing)
∞ Storage 10% to 90% (non-condensing)
∞ Shipping 10% to 90% (non-condensing)
5,000 m (16,400 ft)
12,192 m (40,000 ft)
∞ 170.65 BTU/hour (maximum)
∞ 81.9 BTU/hour (typical)
Vertical Video
Sync
Active Active
Inactive Blanked
- -
20.5 W
64 Kwh
Power
Indicator Consumption
White 50 W (maximum)
24 W (typical)
White Less than 0.3 W
(Glowing )
Off Less than 0.3 W
Power Consumption
About your monitor
Power
15
|