Advertisement
LiberatorMAX Industrial Wireless Headsets
CSB-990MAX and CSB-992MAX
USERS GUIDE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
®
CORPORATION
7/8/19 SBH
3019 Alvin DeVane Blvd.
Ste. 560
Austin, TX 78741
Phone: (650) 965-8020
LiberatorMAX_Fire_User_Guide_REV_A.pdf
FCC Part 15 Notice
Questions or technical issues? Please call:
TECH SUPPORT: 650-965-8020 ext. 703
Page
7
of
7
Advertisement
Need help?
Do you have a question about the LiberatorMAX CSB-900MAX and is the answer not in the manual?
Questions and answers
the micro phone is not working on one of the headsets
The microphone on the Setcom LiberatorMAX CSB-900MAX headset may not be working due to the following reasons:
1. Headset Type: If the headset is an "Intercom-Only" model (CSB-901MAX / CSB-905MAX), it does not support radio transmission, meaning the microphone will not transmit over the mobile radio.
2. Channel Mismatch: The headset must be on the same channel as the MS-900MAX Base Unit and other headsets for network intercom operation.
3. Volume or Power Issues: Ensure the headset is powered on and the volume is set to an appropriate level.
4. Battery Charge: If the internal Lithium-Ion Polymer battery is low or depleted, the headset may not function properly.
5. Connection Issues: If using a Portable Radio, ensure it is properly connected using a PRAC Cable.
6. Environmental Interference: High temperatures or interference from other electronic devices could affect operation.
If issues persist, contacting Setcom customer service is recommended.
This answer is automatically generated