Advertisement
LiberatorMAX Industrial Wireless Headsets
CSB-990MAX and CSB-992MAX
USERS GUIDE
FCC Rules
FCC Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
FCC Warning (Part 15.21)
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
®
CORPORATION
7/8/19 SBH
This portable transmitter with its antenna complies with FCC/IC
RF exposure limits for general population / uncontrolled exposure.
3019 Alvin DeVane Blvd.
Ste. 560
Austin, TX 78741
Phone: (650) 965-8020
LiberatorMAX_Fire_User_Guide_REV_A.pdf
REGULATORY NOTICES
IC Rules
IC RF Exposure Statement / Déclaration d'exposition d'IC RF
This device meets the IC requirements for RF exposure in
public or uncontrolled environments.
Cet appareil est conforme aux conditions de la IC en matière
de RF dans des environnements publics ou incontrôlée.
The antenna(s) used for this transmitter must be used to
provide a separation distance of at least 5 cm from all persons.
La ou les antennes utilisées pour cet émetteur doivent être
utilisées de manière à assurer une distance de séparation d'au
moins 5 cm de toute personne.
Questions or technical issues? Please call:
TECH SUPPORT: 650-965-8020 ext. 703
Page
6
of
7
Advertisement
Need help?
Do you have a question about the LiberatorMAX CSB-900MAX and is the answer not in the manual?
Questions and answers
the micro phone is not working on one of the headsets
The microphone on the Setcom LiberatorMAX CSB-900MAX headset may not be working due to the following reasons:
1. Headset Type: If the headset is an "Intercom-Only" model (CSB-901MAX / CSB-905MAX), it does not support radio transmission, meaning the microphone will not transmit over the mobile radio.
2. Channel Mismatch: The headset must be on the same channel as the MS-900MAX Base Unit and other headsets for network intercom operation.
3. Volume or Power Issues: Ensure the headset is powered on and the volume is set to an appropriate level.
4. Battery Charge: If the internal Lithium-Ion Polymer battery is low or depleted, the headset may not function properly.
5. Connection Issues: If using a Portable Radio, ensure it is properly connected using a PRAC Cable.
6. Environmental Interference: High temperatures or interference from other electronic devices could affect operation.
If issues persist, contacting Setcom customer service is recommended.
This answer is automatically generated