Introduction; General Safety Information - PolyScience WBE20A11B Operator's Manual

1.888.610.7664

Introduction

Thank you for choosing this Water Bath. It is designed to handle a wide
range of laboratory procedures including: incubation, inactivation and ag-
glutination as well as most pharmaceutical, serological, biomedical and
industrial procedures.
To ensure optimium temperature uniformity, your Water Bath features
an energy efficient, large-area heater and thermostatic control. Its PID
microprocessor control (Proportional Integral Derivative) system provides
proportional heat control by anticipating the approach to your set point
temperature and preventing overshoot. A redundant safety thermostat is
standard on all models.

General Safety Information

When installed, operated and maintained according to the directions in
this manual and common safety procedures, your Water Bath should
provide safe and reliable temperature control. Please ensure that all
individuals involved in the installation, operation or maintenance of this
Water Bath read this manual thoroughly prior to working with the unit.
This symbol marks chapters and sections of this instruction
!
manual that are particularly relevant to safety. When attached
to the unit, this symbol draws attention to the relevant section
of the instruction manual.
This symbol indicates that hazardous voltages may be
present.
This symbol indicates that hot surfaces or liquids may be
present.
!
This symbol marks information that is particularly important.
This symbol indicates alternating current.
These symbols on the Power Switch indicate that they place
the main power supply ON/OFF.
110-031 PSC/EN
www.calcert.com
15
10 20
5 25
0 30
2
sales@calcert.com