Table of Contents
Advertisement
4
Press the Navigation buttons and OK
to select and change:
[Screen saver]: Switch the home
•
theater to screen saver mode after
10 minutes of inactivity.
[Auto standby]: Switch the home
•
theater to standby after 30 minutes
of inactivity. This timer works only
when a disc or USB play is paused
or stopped.
[Sleep timer]: Set the duration of
•
the sleep timer so that the home
theater is switched to standby after
the specified period.
Speaker settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Advanced], and then press OK.
4
Press the Navigation buttons and OK
to select and change:
[Enhanced audio]: Select [On] to
•
enable audio post processing at
the speaker and enable karaoke
settings (if your product supports
Karaoke). To play the original audio
of the disc, select [Off].
Tip
Enable audio post processing before
•
you select a predefined sound mode
(see 'Sound mode' on page 24).
Restore default settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Advanced] > [Restore default
settings], and then press OK.
4
Select [OK], and then press OK to
confirm.
» Your home theater is reset to its
default settings except for some
settings such as parental control
and DivX VOD registration code.
EN
27
Advertisement
Table of Contents
