Table of Contents
Advertisement
Display settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Auto Subtitle Shift]: Enable or disable
•
automatic repositioning of subtitles on
TVs that support this feature.
[Display Panel]: Set the brightness of
•
the home theater front panel display.
•
[VCD PBC]: Enable or disable the
content menu navigation of VCD and
SVCD discs with Play Back Control
feature.
Energy saving settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Screen Saver]: Switch the home
•
theater to screen saver mode after
10 minutes of inactivity.
[Auto Standby]: Switch the home
•
theater to standby after 30 minutes of
inactivity. This timer works only when a
disc or USB play is paused or stopped.
[Sleep Timer]: Set the duration of the
•
sleep timer so that the home theater is
switched to standby after the specified
period.
24
EN
Speaker settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Advanced], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Enhanced Audio]: Select [On] to enable
•
audio post processing at the speaker and
enable karaoke settings (if your product
supports Karaoke). To play the original
audio of the disc, select [Off].
Tip
•
Enable audio post processing before you select a
predefined sound mode (see 'Sound mode' on page
21).
Restore default settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Advanced] > [Restore default
settings], and then press OK.
4
Select [OK], and then press OK to
confirm.
» Your home theater is reset to its
default settings except for some
settings such as parental control and
DivX VOD registration code.
Advertisement
Table of Contents
