Table of Contents
Advertisement
Audio and video are not synchronized.
1) Press .
•
2) Press the Navigation buttons (left/
right) to select [Audio sync], and
then press OK.
3) Press the Navigation buttons (up/
down) to synchronize the audio
with the video.
Play
Cannot play a disc.
Clean the disc.
•
Make sure that the home theater
•
supports the type of disc (see 'Media
formats' on page 30).
Make sure that the home theater
•
supports the region code of the disc.
If the disc is a DVD±RW or DVD±R
•
disc, make sure that it is finalized.
Cannot play a DivX file.
Make sure that the DivX file is
•
encoded according to the 'Home
Theater Profile' with the DivX
encoder.
Make sure that the DivX file is
•
complete.
DivX or RMVB/RM subtitles do not
display correctly.
Make sure that the subtitle file name is
•
the same as the movie file name (see
'Subtitles' on page 16).
Select the correct character set:
•
1) Press .
2) Select [Character set].
3) Select the supported character set.
4) Press OK.
Cannot read the contents of a USB
storage device.
Make sure that the format of the USB
•
storage device is compatible with the
home theater.
Make sure that the file system on the
•
USB storage device is supported by
the home theater.
'No entry' or 'x' sign appears on the TV.
The operation is not possible.
•
EasyLink does not work.
Make sure that the home theater is
•
connected to a Philips brand EasyLink
TV, and the EasyLink option is turned
on (see 'Set up EasyLink (HDMI-CEC
control)' on page 11).
For TVs from different manufacturers,
•
the HDMI CEC could be called
differently. Check theTV user manual
on how to enable it.
When you switch on the TV, the home
theater automatically switches on.
This behavior is normal when you are
•
using Philips EasyLink (HDMI-CEC).
To make the home theater work
independently, switch off EasyLink.
My 3D video played in 2D mode.
Make sure that your home theater
•
is connected to a 3D TV through an
HDMI cable.
Make sure that the disc is a Blu-ray 3D
•
disc, and the Blu-ray 3D video option
is on (see 'BD-Live on Blu-ray' on
page 15).
TV screen is black when you play a Blu-
ray 3D video or a DivX copy protected
video.
Make sure that the home theater
•
is connected to the TV through an
HDMI cable.
Switch to the correct HDMI source on
•
the TV.
EN
35
Advertisement
Table of Contents
