Update Software Through The Internet - Philips HTB3581/93 User Manual

Step 2: Update the software
Caution
Do not switch off the home theater or
•
remove the USB flash drive during the
update.
1
Connect the USB flash drive
containing the downloaded file to your
home theater.
Make sure that the disc
•
compartment is closed and no disc
inside.
2
Press (Home).
3
Select [Setup], and then press OK.
4
Select [Advanced] > [Software
update] > [USB].
5
Follow the onscreen instructions to
confirm the update.
» Update process takes about
5 minutes to complete.
Update software through the
Internet
1
Connect your home theater to a
home network with a high-speed
Internet access (see 'Connect and set
up a home network' on page 12).
2
Press (Home).
3
Select [Setup], and then press OK.
4
Select [Advanced] > [Software
update] > [Network].
» If an upgrade media is detected,
you are prompted to start or
cancel the update.
» Downloading of the upgrading file
may take long, depending on your
home network condition.
5
Follow the onscreen instructions to
confirm the update.
» Update process takes about
5 minutes to complete.
» Once complete, the home theater
automatically switches off and
restarts. If it does not, disconnect
the power cord for a few seconds
and then reconnect it.
EN
29