Table of Contents
Advertisement
Speaker settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Advanced], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
•
[Enhanced audio]: Select [On] to enable
audio post processing at the speaker and
enable karaoke settings (if your product
supports Karaoke). To play the original
audio of the disc, select [Off].
Tip
•
Enable audio post processing before you select a
predefined sound mode (see 'Sound mode' on page
24).
Restore default settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Advanced] > [Restore default
settings], and then press OK.
4
Select [OK], and then press OK to confirm.
» Your home theater is reset to its default
settings except for some settings such
as parental control and DivX VOD
registration code.
7
Update software
Philips continually tries to improve its products.
To get the best features and support, update your
home theater with the latest software.
Compare the version of your current software
with the latest version on www.philips.com/
support. If the current version is lower than the
latest version available on the Philips support
website, upgrade your home theater with the
latest software.
Caution
•
Do not install a lower version of software than
the current version installed on your product.
Philips is not liable for problems caused due to
software downgrade.
Check software version
Check the version of the current software installed
on your home theater.
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Advanced] > [Version information].
» The software version is displayed.
•
The last two digits indicate the current
version of the onscreen help installed
on your home theater. For example,
if the current version of the software
is 'Subsystem SW: 35-00-00-05', '05'
represents the current version of
onscreen help installed on your home
theater.
EN
27
Advertisement
Table of Contents
