Connect And Set Up A Home; Network - Philips HTB3581/93 User Manual

Set up the audio
If you cannot hear the audio output of
a connected device through your home
theater speakers, do the following:
Check that you have enabled EasyLink
•
on all the devices, (see 'Set up
EasyLink (HDMI-CEC control)' on
page 11) and
on your TV, set the audio output to
•
"Amplifier" (instead of TV speakers).
For details, see the TV user manual,
and
setup the EasyLink audio control.
•
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [EasyLink] > [System Audio
Control] > [On].
To play the audio from the TV
•
speakers, select [Off], and skip the
following steps.
4
Select [EasyLink] > [Audio Input
Mapping].
5
Follow the onscreen instructions to
map the connected device to the
audio inputs on your home theater.
If you connect your home theater
•
to the TV through an HDMI ARC
connection, make sure that the TV
audio is mapped to the ARC input
on your home theater.

Connect and set up a home

network

Connect your home theater to a network
router for a network setup, and enjoy:
Streamed multimedia content (see
•
'Browse PC through DLNA' on page
20)
12 EN
Voole (see 'Voole' on page 20)
•
BD Live applications (see 'BD-Live on
•
Blu-ray' on page 15)
Software update (see 'Update
•
software through the Internet' on
page 29)
Caution
Familiarize yourself with the network
•
router, media server software and
networking principles. If necessary,
read documentation that accompanies
the network components. Philips is
not responsible for lost, damaged, or
corrupt data.
Before you start
For Voole and software updates, make
•
sure that the network router has
access to the Internet with high-speed
connection and is not restricted by
firewalls or other security systems.
Make the necessary connections
•
described in the quick start guide,
and then switch the TV to the correct
source for your home theater.
Set up the wired network
What you need
A network cable (RJ45 straight cable).
•
A network router (with DHCP
•
enabled).
LAN
www