Power Supply; Switching On The Device - Medion GoPal E570 Series Instruction Manual

5.2. Power Supply

5.2.1. Car Adapter
 Plug the jack of the connection cable into the corresponding receptor of your
navigation system.
 Insert the power adapter into the cigar lighter socket ensuring, that it will not
lose contact while driving. This could cause a malfu.
5.2.2. Alternative Possibility of Charging the Battery
The battery will charge as soon as you connect your navigation device to a
switched-on PC or notebook by means of a USB cable.
No additional software or updates is required for your PC to perform this function.
 Do not interrupt the charging process if possible during the initial charge.
PLEASE NOTE!
The brightness will be adjusted downwards, if necessary, if a USB
connection is being set up when the device is switched on.
It is recommended to set the device to the stand-by mode, in order to
shorten the charging time by USB.

5.3. Switching on the Device

 You will switch your navigation device on or off again completely by pressing
the On/Off key (approx. 1 sec.).
 You can switch your navigation device into standby mode and then back on
again by briefly pressing (> 0.5 sec.) the On/Off switch.
 The navigation system will start the first setting up automatically. Select the
language that you require first. The brand logo will appear and your device will
display the entry screen after a few seconds.
17 of 82