Connection; Power Supply Through Car Adapter; Power Supply Through Ac Adapter (Optional); Cabling - Medion E4245 Operating Instructions Manual

Connection

When connecting your appliance it is important to observe the following instructions:

Power supply through Car Adapter

•
The car adapter should only be connected to the lighter socket of a car
(car battery = DC 12V
the power source in your car, please contact your car manufacturer.

Power Supply through AC adapter (optional)

•
The outlet must be in the vicinity of the appliance and must be easily
accessible.
•
To disconnect your appliance from the power source, remove the mains adapter
from the power socket.
•
Only use the mains adapter on sockets at AC 100–240 V~ AC, 50/60 Hz. If you are
unsure about the power supply to the place of use, ask the relevant energy sup-
plier.
•
Use only the power adapter provided with your appliance.
•
Do not cover the power supply unit, in order to avoid damage through unaccept-
able warming.
•
Stop using the power supply unit if the housing or the feed line to the device is
damaged. Replace it with a power supply unit of the same type.
•
For additional safety, we recommend the use of a surge protector in order to pro-
tect your appliance from damage from spikes or lighting strikes on the power
network.

Cabling

•
Arrange cables so that they do not cause unnecessary obstruction or risk entangle-
ment or snaring. E.g. ensure that the cables cannot be trod on, or tripped over.
•
Do not put any objects on the cable, because it could be damaged if you do so.
•
Do not use any force and pay attention to the correct orientation of the plug when
connecting the cables and plugs.
•
Do not permit any great forces to be exerted on the plug connections, from the
side, for example. This will lead to damage in and to your device if you do so.
•
Avoid short circuiting and broken cable by not crushing or bending it sharply.
4
, truck battery = DC 24V
Safety and Maintenance
). If you are in any doubt about