Operating The Camera - BenQ C103 Series User Manual

6 Operating the camera

Operating the camera
The procedure below is a general guideline for basic operation. It is particularly useful if you
are new to the camera.
1. Press the Power button to turn the power on.
2. Press >
tabs: and
Remember to follow the on-screen display or press
available). Next, press corresponding buttons to access and set more options. At any time, you
can cancel the current operation by pressing
3. Press to zoom-in or
the optical zoom before or during recording.)
4. Press the shutter halfway to set automatic focus. Once the focus is set, the focus frame
color will turn from white (unfocused) to yellow-green (focused).
5. Press the shutter down fully to capture.
6. Release the shutter.
7. In the Movie Record mode, press the shutter to stop video recording.
8. Press to view captured images or recorded videos, and then press
to different images/videos. You can also press
or press to view 9 images on the screen.
• When you are adjusting the focus, there is a separator in the zoom bar between
and . For best image quality, it is recommended to use optical zoom only by
keeping the magnification within
• Flash is automatically turned off in the Movie Record mode.
• The Movie Record mode records both sound and video. The recording time is
continuous, but recording will stop once the memory card space is full.
• In the Movie Record mode, sound is temporarily muted when you are adjusting the
focus.
• Anytime in the Playback mode, you can press
• At any time, you can press the Power button to turn off the camera.
• In Capture or Playback mode, press
screen.
, , , or
), and then press
to zoom-out. (In the Movie Record mode, you can still adjust
and the separator.
Optical Zoom
to locate desired options (under two different
or to make selections.
for instructions (wherever
to return to your previous step.
or to zoom-in/out a captured image,
to switch to the Capture mode.
to decide what information to show on the
Digital Zoom
, or to move