Table of Contents
Advertisement
Section 3 - Configuration
The DHP-W312AV lets you customize your wireless settings for your access point. By setting up the SSID and password for both your 2.4GHz and
5GHz network, you can connect devices to either network. 5GHz is suitable to devices closer to your router that require high speed internet such
as a computer streaming movies live from the internet. 2.4GHz has a greater range than 5GHz and is more suitable to everyday devices that do not
require large bandwidth.
Security Mode for
Select between WPA/WPA2, WEP, clone your
2.4G :
Wi-Fi security or none (not recommended)
for the 2.4GHz frequency.
Wireless Network
The Service Set Identifier (SSID) is the name
Name 2.4G:
of your wireless network. Create a name
using up to 32 characters. The SSID is case-
sensitive. Enable Auto Channel.
Enable Auto
The auto channel selection setting can
Channel Scan:
be selected to allow this device to choose
the channel with the least amount of
interference.
Wireless Channel:
By default the channel is set to 1. The
Channel can be changed to fit the channel
setting for an existing wireless network or
to customize the wireless network. If you
enable Auto Channel Selection, this option
will be greyed out.
WPA/WPA2
Choose a password that is strong. A good
Password:
password uses both letters and numbers
in unpredictable places. Example bad
passwords could be password or 12345678.
Wi-Fi Security
Select between WPA/WPA2, WEP, clone your
Mode 5G:
Wi-Fi security or none (not recommended)
for the 5GHz frequency.
D-Link DHP-W312AV User Manual
Wireless Settings
17
Advertisement
Table of Contents
