ZyXEL Communications 2864 Series User Manual page 92

Code Bits
Z1
Z2
Z3
Z4
*C0 (4,3)
*C1
*C2
*C3
Note: Character length includes start bit, data bits, parity, and stop bit(s).
Code Bits
(2)
(1,0)
S16 Test status register; default: 0:
Code Bits
&T0
&T1
&T2
&T3
&T6
&T7
&T8
Note: This S-register may not be set directly and may not be read while a
test is in progress. Use the AT&Tn command codes.
Bin. Dec. Description
001 32 Profile 1 as active settings; also active after
the next power turn-on.
010 64 Profile 2 as active settings; also active after
the next power turn-on.
011 96 Profile 3 as active settings; also active after
the next power turn-on.
100 128 Profile 4 as active settings; also active after
the next power turn-on. (Default)
00 0 10-bit character length. (Default)
01 8 11-bit character length.
10 16 9-bit character length.
11 24 8-bit character length.
Bin. Dec. Description
0 0 1 stop bit. (Default)
1 4 2 stop bits.
00 0 Even parity.
01 1 Odd parity.
10 2 No parity. (Default)
Bin. Dec. Description
0 No test is in progress. (Default)
1 Analog loopback test is in progress.
2 Reserved.
3 Local digital loopback test is in progress.
6 Remote digital loopback test is in progress.
7 Remote digital loopback with self-test is in
progress.
8 Analog loopback with self-test is in progress.
8–6