ZyXEL Communications 2864 Series User Manual page 115

*. Data compression included. /SREJ is appended if a V.42 connection with selec-
tive reject is established.
**. When more than one type of Distinctive Ring is turned on (S40b3-6),
RING n will be reported, n=Ring type (1-4).
***. Use S42b6 to disable RINGING result code.
Examples:
X5:
Error control level is from NONE to V.42b.
X6:
Error control level is either ARQ or not given at all.
X7:
Use S35.7=1 to enable the following numerical result codes when
an error control connection is being made:
ATVO
Code
50
51
52
53
54
55
56
57
Reset modem and load user profile 0.
Z0
Reset modem and load user profile 1.
Z1
Reset modem and load user profile 2.
Z2
Reset modem and load user profile 3.
Z3
Resets the modem and loads the factory settings, also sets the factory
Z4
default as power-on profile.
Note: Factory default (Z4) is the default power-on profile when the
modem is shipped out of the factory. ATZn also sets profile n to be
the power-on profile. ATZn sets FCLASS=0.
CONNECT 38400/V.32 9600T/MNP5
CONNECT 115200/V.34 28800/V.42b
CONNECT 9600/ARQ
CONNECT 28800/ARQ
CONNECT 9600/ARQ/MNP5
CONNECT 28800/ARQ/V.42b
ATV1
String
CONNECT
CONNECT 1200
CONNECT 2400
CONNECT 4800
CONNECT 7200
CONNECT 9600
CONNECT 12000
CONNECT 14400
ATVO ATV1
Code String
58 CONNECT 16800
59 CONNECT 19200
60 CONNECT 21600
61 CONNECT 24000
62 CONNECT 26400
63 CONNECT 28800
64 CONNECT 31200
65 CONNECT 33600
9–5