Troubleshooting - Wolf OG30LP Use And Care Manual

Outdoor
Hide thumbs Also See for OG30LP:
Table of Contents

Advertisement

Available languages

Available languages

T R O U B LE S HO O T I NG

Troubleshooting

Burners do not light.
Push burner control knob in and verify igniter glows.
Verify electrical power to grill and home circuit breaker
is on.
Verify GFCI has not been tripped.
Purge line of trapped air.
If no electrical supply is available, burners can be lit
manually. Refer to page 9.
Hot surface igniter does not operate.
Verify electrical power to grill and home circuit breaker
is on.
Verify GFCI has not been tripped.
Burners do not heat properly.
Verify proper gas supply.
Verify gas supply line is not bent or kinked.
Preheat burners for 10 minutes.
Inspect grill burners for spiders, insects or other
obstructions.
WARNING
Spiders and insects can nest in burners causing a fire
hazard and damage to the grill.
Burner flame blows out.
Verify proper gas supply.
If exposed to wind, provide a wind block.
Smell of gas is present.
Contact Wolf Factory Certified Service or gas supplier to
check for gas leak.
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowflake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf &
Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries.
All other trademarks are property of their respective owners in the United States and other countries.
|
14
Wolf Customer Care 800.222.7820
Excessive flare-ups occur.
Clean burner grates.
Excess fat on meat or excessive cooking temperature.
Interior or control knob lights do not operate.
Verify electrical power to grill and home circuit breaker
is on.
Verify GFCI has not been tripped.
Interior light bulb may need to be replaced.
SERVI C E
Maintain the quality built into your product by contacting
Wolf Factory Certified Service. For the name of the
nearest Wolf Factory Certified Service, check the contact
& support section of our website, wolfappliance.com or
call Wolf customer care at 800-222-7820.
When contacting service, you will need the model and
serial number of your product. Both numbers are listed
on the product rating plate. Refer to page 6 for rating
plate location.
For warranty purposes, you will also need the date of
installation and name of your authorized Wolf dealer. This
information should be recorded on page 3 of this guide.

Advertisement

Chapters

Table of Contents
loading

Table of Contents