Table of Contents
Advertisement
⑦ Tighten the screws with HDD and main unit.
⑧ Close the top cover and assemble with screw.
B. Hard disk replacement
First turn of the power of the device and then unplug the power.
① Loosen the screw on the left, right and rear side of the product.
② Separate the cover of the main unit.
③ After removing all of power/SATA cable connected to hard disk, please
separate hard disk from the body.
④ In the reverse order of removing the hard disk, assemble the new hard disk.
⑤ After replacing the hard disk, turn on the power of the device.
⑥ Reference
- Each SATA cable must be connected to the connecting port precisely.
- Do not vertically put the hard disk in upright position or put other objects on
top of the hard disk.
- When connecting/disconnecting the hard disk, do not use a motored tool.
- Refer to the following when adding/replacing the hard disk.
14
U
'
M
SER
S
ANUAL
H.264 R
T
DVR
EAL
IME
Advertisement
Table of Contents
