RedMax BC2601DL Owner's/Operator's Manual
  1. Manuals
  2. Brands
  3. RedMax Manuals
  4. Brush Cutter
  5. BC2601DL
  6. Owner's/operator's manual

RedMax BC2601DL Owner's/Operator's Manual

Zenoah brushcutter owner/operator manual
Hide thumbs Also See for BC2601DL:
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER / OPERATOR MANUAL
WARNING
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.
APPLICABLE SERIAL NUMBERS :
DRIVE UNIT 900101 and up
BRUSHCUTTERS
BC2601DL
ENGINE UNIT 900101 and up
Thank you for purchasing a RedMax
product.
Before using our brushcutters, please
read this manual carefully to understand
the proper use of your unit.
T1077-93110(910)

Advertisement

Table of Contents
loading

Related Manuals for RedMax BC2601DL

Summary of Contents for RedMax BC2601DL

  • Page 1 State of California to cause cancer, birth defects or other reproductive harm. APPLICABLE SERIAL NUMBERS : DRIVE UNIT 900101 and up BC2601DL Thank you for purchasing a RedMax product. Before using our brushcutters, please read this manual carefully to understand the proper use of your unit.

  • Page 2: Safety First

    Read this manual carefully to understand all safety precautions, controls, proper operation and maintenance of your RedMax brushcutters. Failure to do so could result in serious injury. Instructions contained in warnings within this manual marked with a concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail.

  • Page 3: Table Of Contents

    SAFETY PRECAUTIONS... 4 IN ORDER TO ENSURE PROPER AND SAFE OPERATION OF YOUR BRUSHCUTTER WORK GEAR AND CLOTHING WARNINGS CONSIDERING HANDLING OF FUEL THINGS TO CHECK BEFORE USING YOUR BRUSHCUTTER THINGS TO CHECK BEFORE STARTING UP THE ENGINE AVOID NOISE PROBLEM THINGS TO BE CAREFUL ABOUT WHEN USING YOUR BRUSHCUTTER NOTES ON CARE AND MAINTENANCE OF YOUR BRUSHCUTTER SET UP ...

  • Page 4: Safety Precautions

    Safety Precautions In order to ensure proper and safe operation of your brushcutter • Read this Owner/Operator Manual carefully. Be sure you understand how to operate this unit properly before you use it. Failure to do so could result in serious injury.

  • Page 5: Work Gear And Clothing

    Safety Precautions Work gear and clothing • When using your brushcutter, always be sure to wear strong, durable, work clothing; shirts should be long-sleeved shirts and pants should be full-length pants reaching down to the ankles. • Always be sure to wear helmet and face protector when using your brushcutter.

  • Page 6: Things To Check Before Using Your Brushcutter

    Safety Precautions Things to check before using your brushcutter • Before beginning work, look around carefully to get a feel for the shape of the land, grass to be trimmed, and whether or not there are any obstacles which might get in the way while working, and remove any obstacles before beginning work.

  • Page 7: Things To Be Careful About When Using Your Brushcutter

    Safety Precautions Things to be careful about when using your brushcutter • When using your brushcutter, grip the handles of the brushcutter firmly with both hands, place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even posture while working.

  • Page 8: Notes On Care And Maintenance Of Your Brushcutter

    Safety Precautions Notes on care and maintenance of your brushcutter • In order to maintain your brushcutter in proper working order, perform the maintenance and checking operations described in this manual at regular intervals. In the event that any parts must be replaced or any maintenance or repair work not described in this manual must be performed, please contact a representative...

  • Page 9: Set Up

    Set up MOUNTING ENGINE 1. Loosen the bolts temporarily attached to the clutch housing. 2. Push the driveshaft toward the gearcase and rotate it by hand to check that the driveshaft is engaged with the gears. 3. Insert the shaft tube into the clutch housing until it bottoms.

  • Page 10: Fuel

    Fuel WARNING • Gasoline is very flammable. Avoid smoking or bringing any flame or sparks near fuel. Make sure to stop the engine and allow it cool before refueling the unit. Select outdoor bare ground for fueling and move at least 3m(10ft) away from the fueling point before starting the engine.

  • Page 11: Operation

    Operation STARTING ENGINE 1. Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start rotating upon starting of the engine. 2. Pump the primer until fuel flows out in the clear tube.

  • Page 12: Stopping Engine

    Operation STOPPING ENGINE 1. Release the throttle lever and run the engine for a half minute. 2. Shift the ignition switch to the STOP position. NOTE • Except for an emergency, avoid stopping the engine while pulling the throttle lever. ADJUSTING IDLING SPEED 1.

  • Page 13: Metal Blade Usage

    Operation METAL BLADE USAGE • Always cut by guiding the head from your right to left. • When moving a wide area, start working from the left side to avoid interference of cut grass. • A metal blade cut best up to the point 1/3 from the edge.
  • Page 14 Operation g. Cut only from your right to your left. h. Keep your path of advance clear of material that has been cut and other debris. 3. How you can maintain the best control: a. Keep a good, firm grip on the unit with both hands.

  • Page 15: Maintenance

    Maintenance WARNING • Always be sure to stop the engine before inspecting the brushcutter for problems or performing maintenance. • Never alter the brushcutter or take the engine apart. • When replacing parts, always be sure to use only RedMax products or products which have been certified by RedMax for use with the RedMax brushcutter.

  • Page 16: Fuel Filter

    Maintenance FUEL FILTER • When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage. SPARK PLUG • Starting failure and mis-firing are often caused by a fouled spark plug. Periodically clean the spark plug and check that the spark gap is in the correct range.

  • Page 17: Storage

    Maintenance INTAKE AIR COOLING VENT WARNING • Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns. •...

  • Page 18: Specifications

    BC2601DL Overall size(LxWxH) ····················································· 71.7x12.4x13.2(in) / 1821x315x335(mm) Dry weight w/o acc. ····························································································· 9.6(lbs) / 4.8(kg) Engine Type······················································································ Air-cooled 2-stroke gasoline Model ·········································································································· Zenoah G26L Displacement ······································································································· 25.4(cc) Max. output ························································································· 1.2(HP)at 7500rpm Fuel ························································································· Mixture(Gasoline 32:Oil 1) Carburetor ··················································································· Walbro Diaphragm type Spark plug ····························································································...

  • Page 19: Parts List

    Parts List NOTE : 1. Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement. 2. KOMATSU ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company.
  • Page 20 Parts List Fig.1 TRIMMER GROUP BC2601DL...
  • Page 21 Fig.1 TRIMMER GROUP BC2601DL Key# Description PIPE-COMP SHAFT GEARCASE-ASS’Y • GEARCASE • BEARING • BEARING • RING • SEAL • SHAFT • GEAR • NUT –– ––––––––– • PINION • BEARING • BEARING • RING • RING • BOLT • BOLT •...
  • Page 22 Parts List Fig.2 ENGINE GROUP BC2601DL...
  • Page 23 Fig.2 ENGINE GROUP BC2601DL Key# Description CYLINDER GASKET, base BOLT INSULATOR GASKET, insulator GASKET, carburetor SCREW MUFFLER ASS'Y • ARRESTER BOLT GASKET, muffler PLATE, muffler SCREW CRANKCASE COMP. • PIN GASKET, case BEARING OIL SEAL OIL SEAL SNAP RING SCREW...

  • Page 24: California Emission Control Warranty Statement

    MANUAL. KOMATSU ZENOAH Co. RECOMMENDS THAT YOU RETAIN ALL RECEIPTS COVERING MAINTENANCE ON YOUR LAWN AND GARDEN ENGINE, BUT KOMATSU ZENOAH Co. CAN NOT DENY WARRANTY SOLELY FOR THE LACK OF RECEIPTS OR FOR YOUR FAILURE TO ENSURE THE PERFORMANCE OF ALL SCHEDULED MAINTENANCE.
  • Page 25 ALL OTHER PARTS EXCEPT ABOVE PARTS, FOR TWO (2) YEARS OF HOME USE [ ONE (1) YEAR FOR ANY OTHER USE ] FROM THE DATE OF ORIGINAL ANY DELIVERY OF THE MODEL BC2601DL UNIT, THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OF PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP.
  • Page 26 KOMATSU ZENOAH AMERICA INC. 4344 Shackleford Road Suite 500 Norcross, Georgia 30093 © Printed in Japan...

Table of Contents