Table of Contents
Advertisement
Quick Links
2VLD12 - 2VLD24 Series
Standard-Duty Venturi-Mounted
Direct-Drive Exhaust Fans
United States
10048 Industrial Blvd., Lenexa, KS, 66215
Tel.: 800.747.1762 • Fax: 800.487.9915
Canada
50 Kanalflakt Way, Bouctouche, NB, E4S 3M5
Tel.: 800.565.3548 • Fax: 877.747.8116
Operational and Parts Manual
Item #: 481803
Rev Date: 081413
Fantech, Inc. and Systemair Mfg.
certify that the ventilators shown
herein are licensed to bear the
AMCA Seal. The ratings shown are
based on tests and procedures
performed in accordance with
AMCA Publication 211 and AMCA
Publication 311 and comply with
the requirements of the AMCA
Certified Ratings Program.
fantech
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fantech 2VLD12 Series
Summary of Contents for Fantech 2VLD12 Series
- Page 1 Operational and Parts Manual Rev Date: 081413 2VLD12 - 2VLD24 Series Standard-Duty Venturi-Mounted Direct-Drive Exhaust Fans Fantech, Inc. and Systemair Mfg. certify that the ventilators shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures...
- Page 2 If the power disconnect point is out-of-sight, 7. Make certain that the power source conforms to the requirements of lock it in the open position and tag to prevent unexpected application your equipment. of power. fantech...
- Page 3 2. Before installing, rotate the propeller to be sure there are no obstructions which would interfere with proper operation. Adjust as required. Dimensions A Sq. Air flow E Dia. Table 1: Dimensional data Model A-Sq. 2VLD1221‡ 2VLD1661‡ 2VLD18B1G 2VLD18B1‡ 2VLD20B1G 2VLD20B1‡ 2VLD24C1G 2VLD24B1‡ Dimensional information is in inches. (‡) Speed Controllable fantech...
-
Page 4: Installation
7. Reassemble the unit in reverse order of disassembly. Parts and replacement 1. Refer to Figure 3 for correct positioning of parts. 2. Refer to “Repair Parts List” for ordering information. fantech... - Page 5 #10-32 Spinlock nut* 1/4”-20 x 1/2” HHC screw* 1/4”-20 Flange spinlock nut* 3/8”-24 Flange spinlock nut* #10 x 3/4” Flatwasher* 3/8”-24 x 1” Hex head capscrew* Speed controller† * Standard hardware item, available locally † Optional accessory, not shown. fantech...
-
Page 6: Troubleshooting
1. Blown fuse or open circuit breaker 1. Replace or reset 2. Defective motor 2. Repair or replace Insufficient air flow 1. Blocked intake or exhaust opening 1. Clear opening of obstruction or increase size of opening 2. Low voltage 2. Determine cause and correct fantech... -
Page 7: Limitation Of Warranty And Liability
Warranty Fantech, Inc. warrants to the original purchaser that our products will be found to be defective. Failure by purchaser to give such written notice free from defects in material and workmanship for a period of one (1) within the 30-day time period shall be deemed an absolute and uncondi- year from the date of shipment. - Page 8 Fantech reserves the right to make technical changes. For updated documentation please refer to www.fantech.net Fantech® fantech...
Need help?
Do you have a question about the 2VLD12 Series and is the answer not in the manual?
Questions and answers