Fantech 2SHE Series Operational Instruction And Parts Manual
Fantech 2SHE Series Operational Instruction And Parts Manual

Fantech 2SHE Series Operational Instruction And Parts Manual

Direct-drive shutter fans

Advertisement

Quick Links

2SHE Series
Direct-Drive Shutter Fans
United States
10048 Industrial Blvd., Lenexa, KS, 66215
Tel.: 800.747.1762 • Fax: 800.487.9915
Canada
50 Kanalflakt Way, Bouctouche, NB, E4S 3M5
Tel.: 800.565.3548 • Fax: 877.747.8116
Operational Instruction and Parts Manual
Item #: 481810
Rev Date: 101414
Fantech, Inc. and Systemair Mfg.
certify that the ventilators shown
herein are licensed to bear the
AMCA Seal. The ratings shown are
based on tests and procedures
performed in accordance with
AMCA Publication 211 and AMCA
Publication 311 and comply with
the requirements of the AMCA
Certified Ratings Program.
fantech

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2SHE Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fantech 2SHE Series

  • Page 1 Operational Instruction and Parts Manual Rev Date: 101414 2SHE Series Direct-Drive Shutter Fans Fantech, Inc. and Systemair Mfg. certify that the ventilators shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures...
  • Page 2 If the power disconnect point is out-of-sight, 7. Make certain that the power source conforms to the requirements of lock it in the open position and tag to prevent unexpected application your equipment. of power. fantech...
  • Page 3 13 1 / 10 1 / 5 3 / X 1 / 2SHE 30C1 39 1 / 13 1 / 10 1 / 5 3 / X 1 / 2SHE 36D1 Dimensional information is in inches. * - Speed Controllable fantech...
  • Page 4: Installation

    4. Periodically clean the propeller and motor of any excessive holding yoke brace to motor yoke tabs. accumulation of dirt. 7. Reassemble the unit in reverse order of disassembly. fantech...
  • Page 5: Replacement Part List

    10 x 3/4” Flat washer* 3/8-24 x 1” HHCS screw* 3/8-24 Spinlock nut* #10-32 Spinlock nut* #10-16 x 5/8” S.M. screw* 3/8” x 13/16” Flat washer* #8-32 Spinlock nut* #10-32 x 1.0 HWH screw * Standard hardware item, available locally fantech...
  • Page 6: Troubleshooting

    3. Increase speed with controller Insufficient air flow 1. Blocked intake or exhaust opening 1. Clear opening of obstruction or increase size of opening 2. Low voltage 2. Determine cause and correct 3. Speed control set too low 3. Increase speed with controller fantech...
  • Page 7: Warranty

    Warranty Fantech, Inc. warrants to the original purchaser that our products will be found to be defective. Failure by purchaser to give such written notice free from defects in material and workmanship for a period of one (1) within the 30-day time period shall be deemed an absolute and uncondi- year from the date of shipment.
  • Page 8 Fantech reserves the right to make technical changes. For updated documentation please refer to www.fantech.net Fantech® fantech...

Table of Contents