Installing The Stainless Steel Handle; Operating Your Appliance; Control Panel - Summit Appliance Accucold ACR612 Instruction Manual

INSTALLING THE STAINLESS STEEL HANDLE

This appliance includes a stainless steel handle that is not required
to operate the unit. To install the handle, follow the instructions
below:
1. Remove the door gasket
handle - you can see two designated holes for handle
installation.
○
2. Install the handle 4 tightly as shown here with two screws
○
and flat washers 3 provided.
3. Replace the door gasket.
It is recommended that you install the appliance in a place where the ambient temperature is between 72º
and 78ºF (23º-26ºC). If the ambient temperature is above or below the recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extremely cold or hot
conditions may cause interior temperatures to fluctuate. The operating temperature range may not be
reached.

CONTROL PANEL

ON/OFF Power
To turn the appliance ON or OFF, press the
NOTE: Pressing this POWER key once can switch off the audible alarm when the alarm is on.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
Interior Light
The interior light makes it easy to view your items. Touching the LIGHT symbol toggles between 2
modes of operation for the internal light: functional (default) mode and showcase mode. If you are
○
2 on the side you wish to install the

OPERATING YOUR APPLIANCE

○
1
symbol and hold for 5 seconds.
9