Summit Appliance Accucold ACR612 Instruction Manual page 14

 The appliance is not properly leveled.
The door will
 The door was reversed and not properly
not close
re-installed.
properly.
 The gasket is dirty.
 The shelves are out of position.
 "E0" indicates a communication error for
3-zone models.
 "E1" or "E2" indicates that the air
Display "E0",
temperature sensor has failed.
"E1", "E2",
 "E3" or "E4"indicates that the defrost
"E3", "E4",
"E5" or "E7".
sensor in the evaporator has failed.
 "E5" indicates a defrost heater failure.
 "E7" indicates a door switch failure.
 The appliance door has been open for
The alarm
sounds.
longer than 60 seconds.
 The display temperature is out of range.
The icon "--" is
lit and flashing
in the
temperature
display.
If you've checked the table above and find that you still need help with your appliance, call our Customer
800-932-4267
Service facility at 1-
questions.
between 9:00AM and 5:00PM ET. We will do our best to answer your
14
 Level the appliance with the
adjustable feet.
 Check the door hinge and reassemble
correctly.
 Clean the door gasket.
 Check the shelves and refit correctly.
 Call for service.
 Close the door.
 Only temperatures within the range
0~99°F/-9~37°C can be displayed. If
the temperature is not within this
range, the icon "--" will be displayed
instead. This is normal.