Setting Up Your Player; Installing Remote Control Batteries - Insignia S-BRDVD4 User Manual

# Item
24
ANGLE
25
DISPLAY
POPUP MENU/
26
TITLE MENU
27
RETURN
28
AUDIO
29
SECONDARY AUDIO

Setting up your player

Installing remote control batteries

To install remote control batteries:
1 Remove the battery compartment cover.
2 Insert two AAA batteries into the battery compartment. Make sure
that the + and – symbols on the batteries match the + and – symbols
in the battery compartment.
3 Replace the battery compartment cover.
12
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
Description
Press to select a viewing angle if multiple angles are available on the disc. For
more information, see "Selecting a viewing angle" on page 25.
Press to display disc information.
During Blu-ray Disc playback, press to open a menu that lets you control
Blu-ray Disc playback.
During DVD playback, press to open the DVD menu (if available). For more
information, see "Using a disc popup menu" on page 25.
Press to return to the previous menu.
Press to select the audio mode. For more information, see "Selecting the
audio mode" on page 25.
In PIP mode, press to turn the audio for the secondary video on or off. For
more information, see "Using PIP (picture-in-picture) mode" on page 24.
Notes
• Make sure that you insert the batteries correctly.
• Do not heat, open, or short-circuit batteries.
• Do not throw batteries into a fire.
• Do not mix different types of batteries or mix old and
new batteries.
• Do not try to recharge non-rechargable batteries.
• If the remote control does not function correctly or if the
operating range becomes reduced, replace the batteries.
www.insigniaproducts.com