Setting Up Your Player; Installing Remote Control Batteries; Connecting A Tv Using An Hdmi Cable (Best) - Insignia NS-WBRDVD User Manual

# Item Description
Press to select the audio mode. For more information,
28
AUDIO
see "Selecting the audio mode" on page 11.
In PIP mode, press to turn the audio for the secondary
29 video on or off. For more information, see "Using PIP
SECONDARY AUDIO
(picture-in-picture) mode" on page 11.

Setting up your player

Installing remote control batteries

To install remote control batteries:
1 Remove the battery compartment cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
Notes
• Make sure that you insert the batteries correctly.
• Do not heat, open, or short-circuit batteries.
• Do not throw batteries into a fire.
• Do not mix different types of batteries or mix
old and new batteries.
• Do not try to recharge non-rechargable
batteries.
• If the remote control does not function correctly
or if the operating range becomes reduced,
replace the batteries.
4

Connecting a TV using an HDMI cable (best)

To connect a TV using an HDMI cable:
• Connect an HDMI cable to the HDMI jack on
Notes
www.insigniaproducts.com
NS-WBRDVD Connected Blu-Ray Disc Player
the back of your player and to the HDMI IN
jack on the TV.
TV
Back of player
• Only the HDMI is capable of 1080i/1080p video
output and the highest definition audio codes.
• An HDMI cable carries both video and audio. If
you want to use TV speakers, you do not need to
make an audio connection. If you want to use an
audio receiver, connect an HDMI cable between
your player and the HDMI input jack on the
receiver. Then connect a second HDMI cable
between the HDMI output jack on the receiver
and the HDMI input jack on the TV.