Table of Contents
Advertisement
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
Resetting your player
To reset your player:
•
To reset all settings (include parental control settings) to the factory
default, select one of the following options in the System menu:
•
•
•
•
•
•
Power
Problem
No power
The player switches to standby mode
Operation
Problem
Remote control does not work
Some or all functions do not work
Restore factory settings and deactivate all connected
applications
Restore factory settings
Deactivate all connected applications
Deactivate Netflix
Deactivate Pandora
Deactivate CinameNow
Solution
Make sure that the power cord is plugged into a power outlet and that
the outlet is supplying power.
After a period of inactivity, your player switches to standby mode
automatically. This is a power saving feature.
If your player switches to standby mode unexpectedly, a safety device
may have been activated. Press
player.
Solution
• Make sure that you are pointing the remote control at the remote
control sensor on the front of your player.
• Make sure that there are no obstructions between the remote
control and the remote control sensor on the front of your player.
• Make sure that there is no colored glass between the remote
control and the remote control sensor on the front of your player.
Colored glass, such as the glass door of an entertainment center,
can interfere with signal reception.
• Make sure that the remote control sensor is not exposed to direct
sunlight or bright light. These can interfere with signal reception.
• Replace the batteries.
• Some functions are not allowed by the disc, for example,
fast-forwarding through the warning information at the
beginning of the disc.
• Condensation may have formed inside your player. Turn off your
player and wait one to two hours for the condensation to
evaporate.
• Reset your player. For instructions, see "Resetting your player" on
page 55.
www.insigniaproducts.com
STANDBY/ON on the front of your
55
Advertisement
Table of Contents
