Dynamic Route Setup - Deliberant DLB27 Series User Manual

Router (R1) in Default Gateway field then click Apply Change button.
Enter IP Address of Network 4, Subnet Mask and IP Address of Router (R2) in Default Gateway field then click Apply Change
button.
In Static Route Table there have two routings for Network 3 and Network 4

Dynamic Route Setup

The Dynamic Route utilizes RIP1/2 to transmit and receive the route information with other Routers.
Enable Dynamic Route and then select RIP 1, RIP2 or Both to transmit/receive packets then click the Apply Change button.
Click the Show Route Table button to show Dynamic Route Table.
45