Vpn Pass-Through; Static Route Setup - Deliberant DLB27 Series User Manual

VPN Pass-through

This functionality lets the device Pass-through the VPN packets including PPTP/ L2TP/IPsec VPN Connection.
Check the VPN Pass-through in WAN Interface of TCP/IP Page that you want and then click Apply Changes button.

Static Route Setup

You can set the routing information to let the Router know what routing is correct if it cannot learn automatically through other
means.
For example, if the user wants to link the Network 3 and Network 4 separately from Network 1, the Routing Table configuration
would be as shown below:
Enable Static Routing in Route Setup of TCP/IP page and then enter IP Address of Network 3, Subnet Mask and IP Address of
44