Wireless Repeater - Deliberant DLB27 Series User Manual

Mesh topology
Device
WDS1
WDS2
WDS3
WDS4
WDS5

Wireless Repeater

A Wireless Repeater can be used to increase the coverage area of another device (Parent AP). Between the Parent AP and
the Wireless Repeater, wireless stations can move among the coverage areas of both devices. When you decide to use the
WDS as a Repeater, please refer to the following instructions for configuration.
In AP mode, enable the WDS function. You must set these connected devices with the same radio channel and SSID.
Choose "WDS+AP" mode.
Using the bus or star network topology:
33
Entries of WDS AP List
The MAC Addresses of WDS2, WDS3, WDS4 and WDS5
The MAC Addresses of WDS1, WDS3, WDS4 and WDS5
The MAC Addresses of WDS1, WDS2, WDS4 and WDS5
The MAC Addresses of WDS1, WDS2, WDS3 and WDS5
The MAC Addresses of WDS1, WDS2, WDS3 and WDS4
Spanning Tree
Protocol Required
Yes
Yes
Yes
Yes
Yes