Router; Bridge; Wisp (Wireless Isp) - Deliberant DLB27 Series User Manual

Router

In this operation mode, the wired Ethernet (WAN) port is used to connect with an ADSL/Cable modem and the wireless NIC is
used for your private WLAN. The NAT is enabled between the 2 NICs, and all the wireless clients share the same public IP
address through the WAN port to the ISP. The default IP configuration for the WAN port is static IP. You can access the web
server of device through the default WAN IP address 172.1.1.1 and modify the setting base on your ISP requirement.

Bridge

The wired Ethernet and wireless NIC are bridged together. Once Bridge mode is selected, all the WAN related functions will be
disabled.

WISP (Wireless ISP)

This mode allows the wireless NIC to act as the WAN port and the wired NIC to act as the LAN port with NAT enabled between
them. To use this mode, you must first set the wireless radio to be in client mode and connect to the AP of your ISP, then you
can set the WAN IP configuration to meet your ISP requirement.
The wireless radio of the device acts in the following roles.
AP (Access Point)
The wireless radio of the device serves as a communications "hub" for wireless clients and provides a connection to a wired
LAN.
20