Remote Control - Salora 50LED8110CSW Operating Instructions Manual

Getting Started

Remote Control

LANG.
1
.,/@
5
Teletext
Press button to enter. Press again to activate mix
mode. Press once more to exit. Follow the instructions
displayed on digital teletext screen.
Digital Teletext (for UK only)
Press button to view digital teletext information.
Operate it with the coloured buttons, cursor buttons
and the OK button. The operation method may differ
depending on the contents of the digital teletext. Follow
the instructions displayed on the digital teletext screen.
When the button is pressed again, the TV returns to
television broadcast.
SOURCE
2 3 4
6 7 8
9 0
OK
BACK EXIT Q.MENU
/ /
1
2
V+ P+
V- P-
1.
Standby / On
2. Play (in media browser mode)
3. No function
4. Mono-Stereo Dual I-II / Current language
5. Fast rewind (in media browser mode)
6. Colored buttons
7. Numeric buttons
8. Channel list
9. Navigational buttons
10. Ok / Confirm
11. Menu on / off
12. Return / back
13. Internet
14. Media browser
15. Electronic programme guide
16. Teletext - Mix
17. Volume up / down
18. Mute
19. Programme up / down
20. Image size
21. Info / Reveal (in TXT mode)
22. My button 1 / YouTube (*)
23. My button 2: Switches between digital/cable (**)
24. Exit
25. Quick menu
26. Previous programme / Now ( in EPG mode)
27. Fast forward (in media browser mode)
28. Subtitle on-off / Subtitle (in media browser mode)
29. Stop (in media browser mode)
30. Pause (in media browser mode)
31. AV / Source
Using My button 1
This button's main function is to run Youtube link.
However, if you want to change this function, you
can press MY BUTTON 1 for five seconds when
on a desired source, channel or link, until the "MY
BUTTON IS SET" message is displayed on the
screen. This confirms that the selected MY BUTTON
is now associated with the selected function. Note that
if you perform first time installation, MY BUTTON 1
will return to its default function.
Using My button 2
Press MY BUTTON 2 for five seconds when on a
desired source, channel or link, until the "MY BUTTON
IS SET" message is displayed on the screen. This
confirms that the selected MY BUTTON is now
associated with the selected function.
English - 29 -