network configuration as they are discovered. Alternately, when the checkbox is selected,
authentication to the IAP becomes a requirement.
Authentication Control for Incoming Connections
When in peer-to-peer mode, select one of the radio buttons to select the desired authentication option.
Table 4-5
Local – Authenticate all wireless access
Force Authorized – Allow any wireless access
Force Unauthorized – Deny all wireless access
6881011Y52-D January 2007
Authentication Control Icons
Icon
MOTOMESH 1.2 Wireless Modem Card Users Guide
Authentication is based on Peer information. (See
the Peer Authentication section in this chapter).
Allow all clients.
Deny all clients.
4-15
Description