Meshtray Security Tab; Require Authentication To Iap Connections; Authentication Control For Incoming Connections; Figure 4-11 Meshtray Security Tab - Motorola WMC6300 User Manual

MeshTray Security Tab

The Security tab is used to set the IAP and Peer Authentication passwords to gain access to the
network.
Figure 4-11

Require Authentication to IAP Connections

When the Require Authentication to IAP Connections checkbox option is unchecked, it allows
authentication of any device currently being monitored and authentication of devices added to the
network configuration as they are discovered. Alternately, when the checkbox is selected,
authentication to the IAP becomes a requirement.

Authentication Control for Incoming Connections

When in peer-to-peer mode, select one of the radio buttons to select the desired authentication option.
Table 4-5
Local – Authenticate all wireless access
Force Authorized – Allow any wireless access
6881011Y52-O August 2005
MeshTray Security Tab
Authentication Control Icons
Icon
MOTOMESH 1.0 Wireless Modem Card Users Guide
Authentication is based on Peer information. (See
the Peer Authentication section in this chapter).
Allow all clients.
4-13
f
Description