Usable Capacity - Siemens KG56FSB40 Instructions For Use Manual

Information on data protection
When your Home Connect refrigerator is
connected for the first time to a WLAN
network that is connected to the Internet,
your refrigerator transmits the following
categories of data to the Home Connect
server (initial registration):
Unique appliance identification
■
(consisting of appliance codes as well
as the MAC address of the installed
Wi-Fi communication module).
Security certificate of the Wi-Fi
■
communication module (to ensure a
secure IT connection).
The current software and hardware
■
version of your refrigerator.
Status of any possible previous
■
resetting to factory settings.
This initial registration prepares the
Home Connect functions for use and is
required only when you want to use
Home Connect for the first time.
Note
Please note that the Home Connect
functions can only be utilized with the
Home Connect app. You can call up
information on data protection in the
Home Connect app.
Declaration of conformity
BSH Hausgeräte GmbH hereby declares
that the appliance which features Home
Connect functionality is in accordance
with the basic requirements and the
other relevant provisions of the directive
1999/5/EC.
A detailed R&TTE Declaration of
Conformity can be found online at
www.siemens-home.com among the
additional documents on the product
page of your appliance.

Usable capacity

Information on the usable capacity can
be found inside your appliance on
the rating plate. Fig. ,
Fully utilising the freezer
volume
To place the maximum amount of frozen
food in the freezer compartment, you can
remove the containers. You can then
stack the food directly on the shelf and
on the floor of the freezer compartment.
Note
Avoid contact between food and rear
panel. Otherwise the air circulation will
be impaired.
Food or packaging could freeze to
the rear panel.
Removing the fittings
Pull out the frozen food container all
the way, lift at the front and remove.
Fig. )
en
17