Siemens KG56FSB40 Instructions For Use Manual page 13

Notes
Please observe the safety instructions
■
and warnings in these instructions for
use and ensure that these are also
adhered to when you are operating
the appliance using the Home
Connect app and are not at home
(see the section on safety instructions
and warnings).
Follow the instructions in the Home
Connect app as well.
The operation on the appliance always
■
has priority over operation via the
Home Connect app. During this time,
it is not possible to operate the
appliance using the app.
Setting up Home Connect
Notes
In order to perform settings via Home
■
Connect, the Home Connect app must
be installed on your mobile device.
Please observe the documents of
Home Connect supplied with the
appliance. Follow the steps specified
by the app to implement the settings.
If the appliance is not operated for a
■
long time, the Home Connect menu
closes automatically. Notes on
opening the Home Connect menu can
be found at the beginning of the
relevant section.
Automatic connection with the home
network (WLAN)
If a WLAN router with WPS function is
available, you can automatically connect
the refrigerator to the home network.
1. Press the super cooling button and
the lock/alarm off button
simultaneously to open the Home
Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time. Button operation is locked
if only the lock/alarm off button is
pressed for a longer period. Press the
lock/alarm off button again until the
lock is deactivated.
2. Press the compartment button
repeatedly until the displays AC and
oF are shown.
3. Press the + button.
The appliance is ready for automatic
connection.
The display shows an animation for
2 minutes.
Follow the steps below during this
period.
en
13