Summary of Contents for Campania International Girona FT-300
Page 1
FT-300 Large Girona Fountain Assembly Instructions Fountain Information: • Three people are recommended for the installation of this fountain! • This fountain holds approximately 40 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #10 Refill Device •...
Page 2
FT-300 Large Girona Fountain Assembly Instructions Three people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-300 Large Girona Fountain Assembly Instructions Step 8 - Position the water feature disc (FT-300A) over the center of the large disc (FT-300B). Step 9 - Using a hose clamp, secure the loose end of the non-kink tubing to the pipe protruding from the bottom of the water feature disc (FT-300A).
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.