Advertisement
Quick Links
Fountain Components
Image
Item Description
Lucas Fountain
- Pour Cap
Lucas Fountain
- Water Feature
Lucas Fountain
- Basin
Lucas Fountain
- Pump Cover
Plate
Lucas Fountain
- Block
Fountain Information:
• This fountain holds approximately 2.5 gallons of water.
• This fountain uses a medium fountain cover: FTNCOV-MED
• No refill device or submersible lights are suggested for this fountain.
Pump Information:
OEMPF140 - 140 GPH Pump (6 ft cord length)
Tools Required:
Bubble Level
Screwdriver
Component
Quantity
Item #
FT-199A
1
FT-199B
1
FT-199C
1
FT-199D
1
FT-199E
1
FT-199 Lucas Fountain
Assembly Instructions
Pump Kit Parts List
Image
Component
PK140 pump
(use only large adapter)
#7 Stopper
Copper "T" Connector
Approx. 8" length of 1/2" black
non-kink tubing
Approx. 6" length of 1/2" black
non-kink tubing
9" lengths of rebar
Copper Spiller
2.8 oz. tube of silicone
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
1
1
2
1
1
4
rev 4/27/2020
Advertisement
Related Manuals for Campania International Lucas FT-199
Summary of Contents for Campania International Lucas FT-199
- Page 1 FT-199 Lucas Fountain Assembly Instructions Fountain Information: • This fountain holds approximately 2.5 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • No refill device or submersible lights are suggested for this fountain. Pump Information: OEMPF140 - 140 GPH Pump (6 ft cord length) Tools Required: Bubble Level Screwdriver...
- Page 2 FT-199 Lucas Fountain Assembly Instructions Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
- Page 3 FT-199 Lucas Fountain Assembly Instructions Step 11 - Fit the plumbing cover (FT-199E) into the space in front of the 6" length of non-kink tubing. FT-199E (2 lbs) 6.25"L x 1"W x 3"H Step 12 - Insert the copper “T” into the pipe protruding at the top of the water feature (FT-199B). 12a - This is meant to control water flow.
- Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.