Summary of Contents for Campania International Del Rey FT-306
Page 1
FT-306 Del Rey Fountain Assembly Instructions Fountain Information: • Three people are recommended for the installation of this fountain! • This fountain holds approximately 40 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #10 Refill Device •...
Page 2
FT-306 Del Rey Fountain Assembly Instructions Three people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-306 Del Rey Fountain Assembly Instructions Step 10 - Place the disc stand (FT-306B) in the center of the small bowl (FT-306C). FT-306B (11 lbs) 11.5"W x 4.75"H Step 11 - Place the feature disc (FT-306A) on top of the disc stand (FT-306B). FT-306A (11 lbs) 14.5"W x 1"H Step 12 - Insert the pump house door (FT-306E) into the pump cover (FT-306D).
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.