Advertisement
Quick Links
Fountain Components
Image
Item Description
Vicobello
Fountain Pump
Door
Vicobello
Fountain Large
Bowl
Vicobello
Fountain Large
Pedestal
Vicobello
Fountain Base
Wiltshire
Fountain Finial
Wiltshire
Fountain Small
Bowl
Wiltshire
Fountain Pump
House
Fountain Information:
• Three people are recommended for the installation of this fountain!
• This fountain holds approximately 20 gallons of water.
• This fountain uses a medium fountain cover: FTNCOV-MED
• Compatible with #10 Refill Device and LED kit
• A different style stopper may be requested for the refill kit.
Pump Information:
OEMPP800 - 800 GPH Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Component
Quantity
Item #
FT-114F
1
FT-114G
1
FT-114H
1
FT-114I
1
FT-305A
1
FT-305B
1
FT-305C
1
FT-305 Wiltshire Fountain
Assembly Instructions
Pump Kit Parts List
Image
Component
PK800 Pump
(Do not use the adapter provided with
the pump)
#10 Stopper
#7 Drain Stopper
Approx. 15" length of 1/2" black
non-kink tubing
1" length of 5/8" clear tubing
1" length of 3/4" clear tubing
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
1
2
1
Wedges
6
1
rev 4/28/2020
Advertisement
Related Manuals for Campania International Wiltshire FT-305
Summary of Contents for Campania International Wiltshire FT-305
- Page 1 FT-305 Wiltshire Fountain Assembly Instructions Fountain Information: • Three people are recommended for the installation of this fountain! • This fountain holds approximately 20 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #10 Refill Device and LED kit •...
- Page 2 FT-305 Wiltshire Fountain Assembly Instructions Three people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
- Page 3 FT-305 Wiltshire Fountain Assembly Instructions Step 8 - Position the medium pedestal (FT-305C) over the pump in the large bowl (FT-114G). Step 9 - Feed the tubing connected to the pump through the top of the medium pedestal (FT-305C). FT-305C (52 lbs) 13"W x 14.25"H Step 10 - Fit the loose end of the tubing assembly to the pipe protruding from the bottom of the medium bowl (FT-305B).
- Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.