Download Print this page

Campania International Palos Verdes FT-303 Assembly Instructions

Advertisement

Quick Links

Fountain Components
Image
Item Description
SM Caterina
Large Bowl
SM Caterina
Base
Palos Verdes
Fountain - Finial
Palos Verdes
Fountain - Small
Bowl
Palos Verdes
Fountain -
Pump Cover
Palos Verdes
Fountain -
Pump Cover
Door
Fountain Information:
• Two people are recommended for the installation of this fountain!
• This fountain holds approximately 5 gallons of water.
• This fountain uses a small fountain cover: FTNCOV-SM
• No refill device or submersible lights are suggested for this fountain.
Pump Information:
OEMPF140 - 140 GPH Pump (6 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Component
Quantity
Item #
FT-299E
1
FT-299F
1
FT-303A
1
FT-303B
1
FT-303C
1
FT-303D
1
FT-303 Palos Verdes Fountain
Assembly Instructions
Pump Kit Parts List
Image
(use only large adapter)
Approx. 10" length of 1/2" black
Proudly
MADE IN USA
Component
PK140 Pump
#10 Stopper
non-kink tubing
Wedges
Hose Clamps
Quantity
1
1
1
4
2
rev 5/5/2020

Advertisement

loading

Summary of Contents for Campania International Palos Verdes FT-303

  • Page 1 FT-303 Palos Verdes Fountain Assembly Instructions Fountain Information: • Two people are recommended for the installation of this fountain! • This fountain holds approximately 5 gallons of water. • This fountain uses a small fountain cover: FTNCOV-SM • No refill device or submersible lights are suggested for this fountain. Pump Information: OEMPF140 - 140 GPH Pump (6 ft.
  • Page 2 FT-303 Palos Verdes Fountain Assembly Instructions Two people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
  • Page 3 FT-303 Palos Verdes Fountain Assembly Instructions Step 8 - Center the small bowl (FT-303B) over the pump house (FT-303C). Step 9 - Use a hose clamp to secure the loose end of the non-kink tubing to the pipe protruding from the bottom of the small bowl (FT-303B). FT-303B (15 lbs) 14"W x 4"H Step 10 - Center the finial (FT-303A) over the small bowl (FT-303B).
  • Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.