Xerox 4215/MRP Reference page 17

Line edge enhancement
Outputfaceup stacking
XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE
Specified by the PostRenderingEnhance and
PostRenderingEnhanceDetails parameters. The image
enhancement options and the control panel mapping are shown
in table 1-3.
Table 1-3.
Key
Revalue
Type
Each output tray accommodates only one method of stacking.
Pages are always stacked face up on the face-up tray and face
down on the top tray and the high-capacity stacker. The
outputfaceup values should correspond to the current output
tray (true for output to the face up tray, and false for output to
the top tray and high-capacity feeder).
Paper offset Specified by the Jog parameter, as shown in table 1-4.
Table 1-4.
Integer
0
1
2
3 (default)
The value of Jog in the page device dictionary is ignored for the
face-up tray. Paper cannot be physically shifted at this output
location.
Multiple copies Specified by the NumCopies parameter. Multiple copies are
delivered uncollated.
Mapping of PostRenderingEnhanceDetails to
control panel selection
Value Function
0 LEE off
1 LEE light
2 LEE medium
3 LEE dark
10 Constant
Mapping of Jog to the printer offset control
panel functions
Function
Do not jog
Jog at device
deactivation
Jog at end of job
Jog after each set
POSTSCRIPT MODE
Control panel display
Disable
Light
Medium (default)
Dark
N/A
Control panel display
Disable
Other setting from host is
active
On job
On job and copy
1–7